|See the following text/image to answer questions 1 through 5
|How to fly a kite
1. Check your local weather report to see if conditions are good for kite flying. Look for light to moderate winds. A wind speed of 5 to 15 mph is best for kite flying.
2. Find a large and windy open area free of trees and power lines. Trees and power lines are dangerous for kites and kite owners.
3. Hold the kite in both hands and toss it lightly into the wind until the wind catches it.
4. Alternatively, let out a small length of kite string and, holding the string in your hand, run with the kite behind you until the wind lifts it.
5. Begin letting out string until the kite reaches a height with which you are comfortable.
6. Keep an eye on your kite, as it may come crashing down because of sudden changes in wind. If it dips, run or pull in the string a bit to give it some lift.
7. Bring the kite down by slowly winding the kite string around a kite spool.
8. Reach out and grab the kite before it hits the ground to avoid damaging it.
|See the following text/image to answer questions 6 through 10
|Instructions to build a Tree House
Search for a big tree that has a wide trunk that is more than 2 feet in diameter and that has branches that are one to one and half foot in diameter.
Purchase wood beams for base and wall structure, wood floorboards, walls and roof, nail, hammer, joist hangers, window and door frame and measuring tape.
Tie base support beams between trees or branches. Secure base beams using 20-inch nails.
Put in floorboards over base beams. Use joist hangers to tie these together.
Frame walls and nail to sub floor. Check to make sure walls are square and adjust if needed.
Cut and install roof rafters. Then install roof board and tar paper. Install window and door frame. Enjoy your tree house.